14. you administer a network consisting of 14 windows 2000 professional computers and 1 windows 2000 server. you want all computers to share a single dialup account with a local internet service provider (isp). you buy a 56k v.90 modem. how do you enable internet connection sharing? (choose all that apply)
a. configure the shared modem to use software handshaking.
b. configure the dialup connection to enable on-demand dialing.
c. configure the dialup connection to enable internet connection sharing.
d. configure all other computers to have a dialup connection that uses the shared modem.
e. attach the modem to one of the windows 2000 professional computers and create a dialup connection to the isp.
f. attach the modem to one of the windows 2000 professional computers and share the modem with the network.
answer：b,c
15. your routed tcp/ip network has 8 windows 2000 servers and 62 windows 2000 professional computers. tcp/ip is the only network protocol in use. on 10 new windows 2000 professional computers, you want to use netbios names to connect to all shared network resources. you assign an ip address and subnet mask to each new computer. what two additional tcp/ip properties must be assigned properly?
a. bindings.
b. dns.
c. gateway.
d. wins.
e. dhcp.
answer：c,d
16. you configure your portable windows 2000 professional computer to redirect all files saved to the my documents folder to your home folder. what two actions should be performed to ensure that all files in the my documents folder are available when the computer is not on the network?
a. enable offline files in windows explorer.
b. create a shortcut in my network places to access your home folder.
c. create a shortcut in windows explorer to access offline folders from the desktop.
d. use synchronization manager to configure your home folder to be available offline.
e. use windows explorer to configure the properties of your home folder to be available offline.
answer：a,e
17. after installing usb camera drivers, your computer’s usb port becomes unusable. you suspect that you have installed drivers that are not certified for windows 2000 professional. how can you configure your usb board to prevent uncertified drivers from being installed in the future? (choose two)
a. enable driver signing.
b. disable driver signing.
c. start the computer in debug mode and replace the camera driver using the device manager.
d. start the computer using the recovery console and restore system state data.
e. start the computer in safe mode and replace the camera drivers using add/remove hardware.
answer：a,e
18. you purchase a usb isdn adapter for your portable windows 2000 computer. plug and play fails to detect the new device. you try the same adapter on your desktop windows 2000 computer and it works fine. what should you do to allow the isdn adapter to work in your portable computer?
a. use the device manager to enable the usb manager root hub.
b. contact the hardware manufacturer to obtain an upgrade for the plug and play bios on your portable computer.
c. enable the usb host controller in the device manager.
d. install the isdn adapter in safe mode.
answer：b
19. after installing a new agp video card in your windows 2000 professional computer, your display defaults to 16 colors, 640 x 480 resolution. you install the manufacturer’s drivers for the card and restart the computer. the monitor is now blank. how do you recover?
a. start the computer in debug mode. restore the original adapter driver settings.
b. start the computer using the emergency repair disk and restore original driver settings.
c. start the computer in safe mode and rename the video adapter in the device manager.
d. start the computer using the recovery console and rename the agp driver.
answer：b
20. your windows 2000 portable computer uses offline files. these files include a large microsoft project file and several smaller personal files. the computer connects to the network remotely via dialup at scheduled intervals throughout the day to download email. you don’t want the large project file to be synchronized, but want your personal files synchronized. what two steps must you take?
a. enable quick synchronization.
b. configure synchronization to prompt before synchronize items.
c. configure synchronization to synchronize the project file only when locally logged on to the lan.
d. configure synchronization of your personal files when connected locally to the lan and via dialup.
answer：c,d
21. your two hard drives, c and d, both have more than 500 mb of free space. when running memory intensive applications, access to your c: drive is noticeably slower. what should you do to maximize disk performance?
a. configure the initial size of the paging file on drive c to be set by the system and place a maximum size on virtual memory of 64 mb.
b. configure the initial size of the paging file on drive c to be set by the system and place a maximum size on virtual memory of 128 mb.
c. move the paging file to drive d. have the system set initial virtual memory size and maximize virtual memory size to 256 mb.
d. move the paging file to drive d. set the initial size of virtual memory to 56 mb and maximize the size of virtual memory to 256 mb.
answer：c
22. you compress a 2 mb bitmap file to 1 mb and attempt to copy it to a 1.4 mb floppy disk. however, you are given the error, “drive is full.” what should you do next?
a. move the file to the floppy instead of copying it.
b. use another program to compress the bitmap file before copying the file to the floppy disk.
c. reformat the floppy disk and copy the compressed bitmap file to the floppy disk.
d. copy the empty compressed folder from the hard disk to the floppy disk. copy the compressed bitmap file to the folder on the floppy disk.
answer：b
23. you install an insa-based scsi adapter in your portable windows 2000 computer’s docking station. you start the computer, but the adapter is not detected while windows 2000 boots. you run the add/remove hardware wizard, but the adapter is still not detected. what should you do next?
a. restart the add/remove hardware wizard and manually add the scsi adapter driver.
b. restart the computer in safe mode and run add/remove hardware to automatically detect the scsi adapter driver.
c. copy the scsi adapter driver to the \i386 directory and restart the add/remove hardware wizard to automatically detect the scsi adapter.
d. reconfigure windows 2000 for driver signing. restart add/remove hardware to automatically detect the scsi adapter.
answer：a
24. you are networking 8 windows 2000 professional computers. tcp/ip will be the only protocol in use. the first 6 computers have a 10 mbps/utp combination adapter card. the 7th and 8th computers have 10/100 mbps bnc/utp adapter cards. all computers are connected to a 10/100 switch using cat5 utp cabling. only computers 7 and 8 can communicate with each other. what must you do to allow all 8 computers to communicate with each other?
a. configure the 10/100 switch to only transfer at 100 mbps.
b. configure the 10/100 mbps network adapters to only communicate at 10 mbps.
c. change the network adapter cards to use the bnc transceiver setting.
d. change the network adapter cards to use the utp transceiver setting.
answer：d
25. you upgrade 6 mps compliant computers from nt workstation 4.0 to windows 2000 professional. each computer has two 550 mhz processors and is used for resource-intensive graphics applications. after the upgrade, users complain that the graphics applications perform noticeably slower. what should you do to correct the problem?
a. enable the agp bridge controller in the device manager.
b. install mps compliant drivers for the second processor in the device manager.
c. install acpi compliant drivers for the second controller in the device manager.
d. run the processor optimization wizard within system tools.
answer：b
26. you are configuring your computer to dual-boot between windows 2000 and windows 98. your computer has 3 6gb hard drives—disk0, disk1, and disk2. you want to install windows 98 on disk0 and windows 2000 professional on disk1. you will store project files on disk2. these project files must be accessible from either operating system. how should each disk be formatted?
a. disk0 (ntfs); disk1 (fat16); disk2 (fat32)
b. disk0 (fat32); disk1 (ntfs); disk2 (ntfs)
c. disk0 (fat32); disk1 (ntfs); disk2 (fat32)
d. disk0 (ntfs); disk1 (ntfs); disk2 (fat32)
answer：c
责任编辑：小草
您现在的位置： 