9.You Windows NT Server network uses the single master domain model.The master domain contains seven domain controllers and 2,000 user accounts. Using Performance Monitor,you determine that the PDC is being overloaded with synchronization to the BDCs.
What should you do to reduce the load on the PDC? A. Add a new BDC to the domain.
B. Stop the Net Logon service on the PDC.
C. Increase the Pulse registry entry on the PDC.
D. Increase the Pulse Concurrency registry entry on PDC.
c
10.You are running Windows NT Server 4.0 Network monitor on the Windows NT Server computer that functions as the DNS,DHCP,and WINS server for the network. All computers on the network use TCP/IP with DHCP,DNS,and WINS.You capture 1,200 packets.
How should you configure the display filter to view only the packets pertaining to the assignment of IP addresses?
A. Protocol==SMB
B. Protocol==DHCP
C. Protocol==BROWSER
D. *NETBIOS Multicast(ETHERNET)<->*ANY
b
11.You are administrratoor of a Windows NT Server computer named Techs.Techs has an intel Pentium 133-MHz processor,32 MB of RAM,and 2-GB SCSI hard disk.Techs functions as a file-and-print server for 115 client computers.
Users of client computers have recently started reporting slow reponse times when they access files located on Techs.You run Performance Monitor and gather the fol lowing average statistics.
Computer:\\TECHS
Object:Processor o
%Processor Time 80.835
Object:Memory
Pages/sec 101.155
Object:Server
Bytes Total/sec 84364.461
Object:PhysicalDisk o
%disk Time 100.000
What should you do Techs to provider the greatest increase in performance?
A. Upgrade the processor.
B. Upgrade RAM to 64 MB
C. Upgrade Techs to a multiprocessor system.
D. Implement a stripe set with parity.
b
12.you are using an accounting application to print checks.The printer jams in the middle of the print job.The accounting application will allow you to reprint the checks.You turn off the printer and clear the jammed checks.
What should you to do in Print Manager to complete printing this batch of checks ?
A.Select Resume from the Printer menu.
B.Select Resume from the Document menu.
C.Select Restart from the Document menu.
D.Select Pause Printing from the Printer menu,and then resume printing.
b
13.Your Windows NT Server computer is configure with six SCSI hard disks.One hard disk is the system disk,and the other five are configured as a stripe set with parity.
After a power outage,your server reboots,and you discover that two of the five hard disks in the stripe set wiyh parity have failed.You replace both failed hard disks.
What else should you do to recover from the hard disk failure?
A.Regenerate the stripe set with parity by using Disk Administrator.
B.Wait for Windows Nt server to regenerate the stripe set with parity.
C.Create a stripe set across all five hard disks,and then restore from tape bacpup.
D.Create a stripe set with parity across all five disks,and then restore from tape backup.
d
**14.After you install a new device driver for a SCSI hard disk, you discover that your Windows NT Server computer will not start.You do not have the Windows NT setup disks but you have an Emergency Repair disk.
What must you do to recover the system?(Choose two.)
A.Create the Windows NT setup disks by using the Winnt. exe program on anthor computer.
B.Restore the registry from the Emergency Repair disk by using the Rdisk.exe utility.
C.Boot with the Emergency Repair disk and recover the registry.
D.Boot with the Windows NT setup disks and restore the registry from the Emergency Repair disk.
a d
15.You install Windows NT Server without creating an Emergency Repair disk. You then configure several SCSI devices and printers.You want to back up the configuration settings so that you can quickly restore the computer in the event of a startup failure.
How should you do this?
A.Save a copy of the registry by using the Windows NT Backup program.
B.Save all configuration information to disk by using Disk Administrator.
C.Make a copy of the registry hives by using Save Key in the Registry Editor.
D.Create an Emergency Repair disk with the current configuration settings by using the Rdisk.exe utility.
d
责任编辑：小草
您现在的位置： 