思科认证考试(CCNA)考试模拟题72-78及答案
来源:优易学  2011-12-2 18:18:38   【优易学:中国教育考试门户网】   资料下载   IT书店

Questions 
72. [xINx] The size of a window in a TCP segment establishes what? (Choose one.) 

a) The maximum number of bytes that a single frame may not exceed 
b) The allowable bandwidth for this TCP session 
c) The number of octets that the receiver must be willing to accept 
d) The number of 32-bit words in the header 
e) The number of octets that the sender is willing to accept 

73. [xINx] Which protocols are best described as connection-oriented and reliable? (Choose two.) 

a) UDP 
b) IP 
c) TCP 
d) IPX 
e) TCP over IP 
f) UDP over IP 

74. [xINx] A Telnet session to a remote host would be addressed to what port number at the remote host? (Choose one.) 

a) UDP port 53 
b) TCP port 53 
c) UDP port 21 
d) TCP port 21 
e) UDP port 161 
f) TCP port 23 

75. [xINx] TCP "source" port number(s): (Choose the one that best describes.) 

a) Depends on the application being accessed on the destination host. 
b) Depends on the application running on the source host. 
c) Are usually assigned by the source host, and are typically some number greater than 1023. 
d) Are assigned by the source host and are usually one of the "well known" port numbers. 
e) Must be negotiated by the sender and receiver during session setup. 

76. [xINx] In a TCP acknowledgment, the ack number refers to: (Choose one.) 

a) A sequential number beginning with 1, and incremented by 1 with each exchange, that identifies this exchange of packets as being complete 
b) The number of the packet expected next 
c) The number of the packet expected next, plus 1 
d) A number agreed upon at session establishment, which will be used by the receiver to indicate a successful exchange of packets 
e) TCP does not use acknowledgments. 

Reference the diagram and configurations below for Questions 77 and 78: 



Router_C#sh run

Building configuration...

Current configuration:

!

version 11.2

!

hostname Router_C

!

!

appletalk routing

ipx routing 0060.09c3.df60

!

interface Ethernet0

ip address 172.16.1.1 255.255.255.0

appletalk cable-range 100-105 103.243

appletalk zone right

ipx network DAD

!

interface Ethernet1

no ip address

shutdown

!

interface Serial0

ip unnumbered Ethernet0

appletalk cable-range 120-120 120.17

appletalk zone left

ipx network AD

clockrate 56000

!

interface Serial1

no ip address

shutdown

!

router igrp 100

network 172.16.0.0

!

no ip classless

!!

line con 0

line aux 0

line vty 0 4

login

!

end

Router_B#sh run

Building configuration...

Current configuration:

!

version 11.3

no service password-encryption

!

hostname Router_B

!

!

appletalk routing

ipx routing 0007.7816.fe54

!

interface Loopback0

ip address 172.17.1.1 255.255.255.0

!

interface Serial0

ip unnumbered Loopback0

no ip mroute-cache

appletalk cable-range 130-130 130.81

appletalk zone right

ipx network CAD

no fair-queue

!

interface Serial1

ip unnumbered Loopback0

appletalk cable-range 120-120 120.125

appletalk zone left

ipx network AD

!

interface Serial2

no ip address

shutdown

!

interface Serial3

no ip address

shutdown

!

interface TokenRing0

no ip address

shutdown

!

interface BRI0

no ip address

shutdown

!

router igrp 100

network 172.17.0.0

!

ip classless

!

!

!

!

!

line con 0

line aux 0

line vty 0 4

login

!

end

Router_A#sh run

Building configuration...

Current configuration:

!

version 11.3

no service password-encryption

!

hostname Router_A

!

!

appletalk routing

ipx routing 0010.7b15.bd41

!

interface Ethernet0/0

ip address 10.1.1.1 255.255.255.0

appletalk cable-range 106-110 106.17

appletalk zone left

ipx network BAD

!

interface Serial0/0

ip unnumbered Ethernet0/0

no ip mroute-cache

appletalk cable-range 130-130 130.37

appletalk zone right

ipx network CAD

clockrate 56000

!

interface TokenRing0/0

no ip address

shutdown

ring-speed 16

!

interface FastEthernet1/0

no ip address

shutdown

!

router igrp 100

network 10.0.0.0

!

ip classless

!!

line con 0

line aux 0

line vty 0 4

login

!

end
77. [RxNx] What routing protocols are configured? 

a) EIGRP, IGRP, RIP 
b) IGRP RTMP IPX NLSP 
c) IPX RIP, IGRP, RTMP 
d) EIGRP, RTMP, IPX RIP 
e) IPX RIP, IGRP 

78. [RXNx] The Serial 0/0 IPX encapsulation of Router_A is: 

a) Novell-ether 
b) SAP 
c) ARPA 
d) SNAP 
e) Can not be determined 
f) HDLC

[1] [2] 下一页

责任编辑:小草

文章搜索:
 相关文章
热点资讯
热门课程培训