version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
service dhcp
!
hostname cisco1841
!
boot-start-marker
boot-end-marker
!
logging buffered 51200 warnings
!
no aaa new-model
!
resource policy
!
mmi polling-interval 60
no mmi auto-configure
no mmi pvc
mmi snmp-timeout 180
ip subnet-zero
ip cef
!
!
ip dhcp database 123
no ip dhcp use vrf connected
ip dhcp excluded-address 192.168.1.1
ip dhcp ping packets 0
!
ip dhcp pool 123
network 192.168.1.0 255.255.255.0
default-router 192.168.1.1
dns-server 202.106.0.20 202.106.46.151
!
!
no ip domain lookup
ip domain name yourdomain.com
ip dhcp-server 192.168.1.1
vpdn enable
vpdn ip udp ignore checksum
!
vpdn-group pppoe
request-dialin
protocol pppoe
!
!
username cisco privilege 15 secret 5 $1$ZKUk$YoVcdG31aDaIAn/mdK9qL0
!
!
!
interface FastEthernet0/0
description $ETH-LAN$$ETH-SW-LAUNCH$$INTF-INFO-FE 0$
ip address 192.168.1.1 255.255.255.0
ip access-group 100 in
ip nat inside
duplex auto
speed auto
!
interface FastEthernet0/1
no ip address
duplex auto
speed auto
pppoe enable
pppoe-client dial-pool-number 1
!
interface Dialer1
ip address negotiated
ip access-group 100 in
ip mtu 1492
ip nat outside
encapsulation ppp
dialer pool 1
dialer vpdn
dialer-group 1
no cdp enable
ppp pap sent-username 1234567 password 0 1234567
!
ip classless
ip route 0.0.0.0 0.0.0.0 Dialer1
!
no ip http server
ip http authentication local
ip http timeout-policy idle 5 life 86400 requests 10000
ip nat inside source list 1 interface Dialer1 overload
!
access-list 1 permit any
access-list 100 deny
access-list 100 deny
access-list 100 permit ip any any
dialer-list 1 protocol ip permit
!
control-plane
!
banner login ^C
-----------------------------------------------------------------------
Cisco Router and Security Device Manager (SDM) is installed on this
device.
This feature requires the one-time use of the username "cisco"
with the password "cisco".
Please change these publicly known initial credentials using SDM or the
IOS CLI.
Here are the Cisco IOS commands.
username <myuser> privilege 15 secret 0 <mypassword>
no username cisco
Replace <myuser> and <mypassword> with the username and password you
want to use.
For more information about SDM please follow the instructions in the
QUICK START
责任编辑：小草
您现在的位置： 